Introduction; Removing The Library From The Shipping Carton - Quantum ATL M1500 Unpacking Instructions Manual

Introduction

Removing the Library from the Shipping Carton

This document explains how to unpack a Quantum ATL M1500. The
unpacking procedure consists of the following major steps:
• Removing the library from the shipping carton
• Removing the remaining packing materials
• Checking the contents
To unpack the library:
Be careful not to damage the packaging materials while
Note:
unpacking the library. Save all packaging materials for
possible future use.
The following tools are required for this operation:
1
• Scissors
• No. 2 POZIDRIV
minimum)
• Antistatic wrist strap
Place the shipping carton and pallet as close to the installation site
2
as possible.
The shipping carton is secured to the pallet by two
Warning:
plastic straps. The straps are under tension and snap
away when cut.
Using the scissors, carefully cut the two plastic straps securing the
3
shipping carton to the pallet (see
Lift the lid off of the shipping carton.
4
Introduction
Quantum ATL M1500 Unpacking Instructions
®
screwdriver, long (10 in. or 250 mm
figure 1).
Document 6421002-06 A01
July 2003
0
0
3