3. Re-route the speaker and WLAN antenna cables through the routing channels on the palmrest.
4. Reconnect the display cable to the connector on the system board.
Next steps
1. Install the
Wireless
card.
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
Hinge caps
Removing the hinge caps
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
Wireless
5. Remove the
display
assembly.
About this task
The following images indicate the location of the hinge caps and provides a visual representation of the installation procedure.
54
Removing and installing components
After working inside your
Before working inside your
card.
computer.
computer.