Removal And Replacement Procedures - IBM 5886 Removal And Replacement Procedures

Removal and replacement procedures

Use the removal and replacement procedures when you repair, maintain, or exchange your system parts.
Before you begin a replacement, perform these tasks:
1. If you are performing a replacement procedure that might put your data at risk, ensure, if possible,
that you have a current backup of your system or logical partition (including operating systems,
licensed programs, and data).
2. Review the installation or replacement procedure for the feature or part.
3. Note the significance of color on your system. Black or silver on a part of the hardware indicates a
touch point where you can grip the hardware to remove it from or install it in the system, open or
close a latch, and so on. Black or silver might also indicate that the part can be removed and replaced
with the system or logical partition power on.
4. Ensure that you have access to a medium, flat-blade screwdriver.
5. If parts are incorrect, missing, or visibly damaged, contact your service provider or next level of
support.
© Copyright IBM Corp. 2007, 2013
1