Power Button; Removing The Power Button - Dell OptiPlex 3080 Tower Service Manual

Steps
1. Press and slide the speaker in the slot on the chassis until it snaps into place.
2. Route the speaker cable through the routing guide on the chassis.
3. Connect the speaker cable to the connector on the system board.
Next steps
1. Install the fan duct.
2. Install the side cover.
3. Follow the procedure in

Power button

Removing the power button

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the fan duct.
4. Remove the front bezel.
About this task
The following images indicate the location of the power button and provides a visual representation of the removal procedure.
52 Disassembly and reassembly
after working inside your
before working inside your
computer.
computer.