Solid-State Drive; Removing The M.2 2230 Pcie Solid-State Drive - Dell OptiPlex 3080 Tower Service Manual

Steps
1. Align and insert the 3.5 inch hard drive into the slot on the chassis.
2. Hold the hard drive against the chassis and replace the four (#6-32) screws to secure the hard drive to the computer
chassis.
3. Connect the power cable and data cable to the hard drive.
Next steps
1. Install the fan duct.
2. Install the side cover.
3. Follow the procedure in

Solid-state drive

Removing the M.2 2230 PCIe solid-state drive

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the fan duct.
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure.
30 Disassembly and reassembly
after working inside your
before working inside your
computer.
computer.