Subaru Impreza 2023 Manual page 93

• On a downhill grade, automatic braking may operate in order to maintain the
set vehicle speed.
• When driving on a curve, the vehicle may not accelerate, or may decelerate,
even if the set vehicle speed is higher than the current vehicle speed.
• To return to Adaptive Cruise Control use, cancel Conventional Cruise Control
and then briefly press the
notification will sound (1 short beep) when switching to Adaptive Cruise Con-
trol.
■ Increasing the set vehicle speed
●
Using the RES/SET switch
• Push to the "RES/+" side briefly.
Every time the switch is pushed, the set
vehicle speed will increase to the next 5
mph (5 km/h) increment.
• Push to the "RES/+" side continuously.
While the switch is being pushed, the set
vehicle speed will increase in increments of
1 mph (1 km/h).
When operating the switch, the set vehicle
speed changes on the combination meter dis-
play.
●
Using the accelerator pedal
1. Depress the accelerator pedal to increase
vehicle speed.
2. When the desired speed is reached, press
the RES/SET switch to the "SET/-" side.
The speed at the time of pressing the
switch will be set as the new set vehicle
speed, and it appears on the EyeSight dis-
play area.
NOTE
/
Conventional Cruise Control
(Following distance setting) switch. A
S03395
S03396
93