Subaru Impreza 2023 Manual page 71

■ Canceling Lane Departure Prevention Function
●
Canceling by driver operation
Any of the following operations temporarily cancels Lane Departure Prevention Function.
While temporarily canceling this function,
EyeSight display area illuminates in white and the lane indicator turns to gray.
• Depressing the brake pedal strongly
• Operating the turn signal lever
• The system determines that the driver operates the steering wheel to make a lane
change.
• Turning on the hazard warning flasher switch
●
Automatic cancellation by the system
Under the following conditions, a notification will sound 1 short beep and 1 long beep and
Lane Departure Prevention Function is temporarily canceled.
While the function is temporarily canceled,
(Lane Keep Assist indicator) on the
EyeSight display area illuminates in white and
the lane indicator turns to gray. Also, the Lane
Keep Assist cancellation message is dis-
played on the combination meter display.
• The system does not detect the lane mark-
ings.
• The windshield wiper operates at a high
speed.
• The vehicle speed is less than approxi-
mately 34 mph (55 km/h) or is more than approximately 93 mph (150 km/h).
• Vehicle Dynamics Control or Traction Control Function is activated.
• Either the driver's door, the front passenger's door or the rear door is open.
• The driver's seatbelt is unfastened.
• The select lever is moved to a position other than "D", "M" (models with manual mode) or
"L" (models with "L" position).
- Lane Departure Prevention Function can be resumed after the select lever is returned
to the "D", "M" or "L" position.
(Lane Keep Assist indicator) on the
Lane Keep Assist
White
S03179
71