Subaru Impreza 2023 Manual page 91

(2) Switch to Conventional Cruise Control.
Press and hold the
seconds or longer to switch from Adaptive Cruise Control to Conventional Cruise Con-
trol. A notification sounds 1 short beep.
At this time, the following distance setting indicator on the EyeSight display area of the
combination meter display turns off and
(white) is displayed.
To set the ready status:
Conventional Cruise Control can be activated when all of the following conditions are
met and (READY indicator) is displayed on the EyeSight display area.
- All doors (except the rear gate/trunk)
are closed.
- The driver's seatbelt is fastened.
- The select lever is in the "D" or "M"
(models with manual mode) position.
- The brake pedal is not depressed.
- The road is not on a steep slope.
- The steering wheel has not been turned
significantly in either direction.
- The vehicle speed is between approxi-
mately 20 mph (30 km/h) and 90 mph
(145 km/h).
- Parking brake is released.
/ (Following distance setting) switch for approximately 2
Conven-
tional
Cruise
Control
indicator
(white)
S03397
READY
indicator
Conventional Cruise Control
(Conventional Cruise Control indicator)
S03154
S02711
91