Subaru Impreza 2023 Manual page 47

How to use Adaptive Cruise Control
■ Setting Adaptive Cruise Control
(1) Setting Adaptive Cruise Control to standby status
Press the
(white), your vehicle indicator and the following distance setting indicator are displayed
on the EyeSight display area of the combination meter display.
The set vehicle speed display will read "- - MPH (- - - km/h)".
To set the ready status:
Adaptive Cruise Control can be activated
when all of the following conditions are
met and
played on the EyeSight display area.
- All doors (except the rear gate/trunk)
are closed.
- The driver's seatbelt is fastened.
- The select lever is in the "D" or "M"
(models with manual mode) position.
- The brake pedal is not depressed while
driving or the brake pedal is strongly depressed while stopping.
(CRUISE) switch. At this time,
S03393
(READY indicator) is dis-
Adaptive Cruise Control
(Adaptive Cruise Control indicator)
Following
distance
setting
indicator
Adaptive
Cruise
Control
indicator
(white)
READY
indicator
S03067
S02709
47