3
Remove the fuse.
Only type A fuse can be removed
using the pullout tool.
4
Check if the fuse is blown.
Replace the blown fuse with a new
fuse of an appropriate amperage
rating. The amperage rating can be
found on the fuse box lid.
Type A
Normal fuse
A
Blown fuse
B
7-3. Do-it-yourself maintenance
Type B
Normal fuse
A
Blown fuse
B
Type C
Normal fuse
A
Blown fuse
B
■
After a fuse is replaced
●
When installing the lid, make sure
that the tab is installed securely.
●
If the lights do not turn on even
after the fuse has been replaced,
a bulb may need replacement.
(P.620)
●
If the replaced fuse blows again,
have the vehicle inspected by
your Toyota dealer.
■
If there is an overload in a cir-
cuit
The fuses are designed to blow,
protecting the wiring harness from
damage.
619
7