Toyota RAV4 HYBRID 2020 Manual page 147

NOTICE
● If a bicycle carrier or similar
heavy object is attached to the
power back door, disable the
Hands Free Power Back Door.
(P.108)
Changing settings of the
power back door system
(vehicles with power back
door)
The settings of the power back
door system can be changed by
displaying the "Vehicle Set-
tings" - "PBD" screen from the
screen of the multi-informa-
tion display. (P.108)
The changed power back door set-
tings are not reset by turning the
power switch to OFF. In order to
restore the original settings, they
need to be changed back on the
screen of the multi-information
display.
Adjusting the open posi-
tion of the back door
(vehicles with power back
door)
The open position of the power
back door can be adjusted.
1
Stop the back door in the
desirable position. (P.138)
2
Press and hold the power
back door switch on the back
door for approximately 2 sec-
onds.
3-2. Opening, closing and locking the doors
When the settings are completed,
the buzzer sounds 4 times.
When opening the back door the
next time, the back door will stop at
that position.
■ Canceling the adjusted open
position of the back door
Press and hold the power back door
switch on the back door for approxi-
mately 7 seconds.
After the buzzer sounds 4 times, it
sounds twice more. When the
power back door does the opening
operation the next time, the door will
open to the initial settings position.
■ Customization
The opening position can be set
with the multi-information display.
(P.108)
Priority for the stop position is given
to the last position set by either the
power back door switch on the back
door or multi-information display.
147
3