Toyota RAV4 HYBRID 2020 Manual page 600

600
7-3. Do-it-yourself maintenance
WARNING
■ When initializing the tire pres-
sure warning system
Do not initialize tire inflation pres-
sure without first adjusting the tire
inflation pressure to the specified
level. Otherwise, the tire pressure
warning light may not come on
even if the tire inflation pressure is
low, or it may come on when the
tire inflation pressure is actually
normal.
Registering ID codes
(vehicles with tire pres-
sure warning system)
For models made in Japan

without tire inflation pressure
display function
Every tire pressure warning
valve and transmitter has a
unique ID code. In addition to
the set of tire pressure warning
system sensor ID codes initially
registered to the vehicle, a sec-
ond set of ID codes can be reg-
istered. A second set of tire
pressure warning system sensor
ID codes can be registered at
your Toyota dealer. When 2 sets
of ID codes have been regis-
tered, either ID code set can be
selected.
*1
: The country of production is writ-
ten on the Certification Regula-
tion Label. (P.678)
Except for models made in

*2
Japan without tire inflation
pressure display function
*2
: The country of production is writ-
ten on the Certification Regula-
tion Label. (P.678)
Every tire pressure warning
valve and transmitter has a
unique ID code. When replacing
a tire pressure warning valve
and transmitter, it is necessary
to register the ID code.
When registering the ID codes,
perform the following procedure.
1
Park the vehicle in a safe
place, wait for approximately
20 minutes, and then start
the hybrid system.
2
Press
*1
control switches on the steer-
ing wheel and select
3
Press
control switches and select
"Vehicle Settings", and then
press
4
Press
control switches and select
"TPWS", and then press
5
Press
control switches and select
"Change Wheel". Then press
and hold
pressure warning light starts
slowly blinking 3 times.
The change wheel set mode is acti-
vated and registration is started.
Vehicles with a tire inflation pres-
sure display function only:
Then a message will be displayed
on the multi-information display.
When registration is being per-
or of the meter
.
or of the meter
.
or of the meter
or of the meter
until the tire
.