Low Battery; Starting Up; Turn The Device On And Off; Calibrate The Device - QTek 9000 User Manual

Low battery

When the low-battery warning appears, do the following:
1. Immediately save your current data.
2. Synchronize with your PC to charge the battery.
3. Turn off your device.

1.4 Starting Up

Turn the device on and off

To turn on the device, press the POWER button. When you turn on
the device for the first time, you are asked to complete a calibration
process. For more information, see "Calibrate the device" in this
chapter.
To turn off the device, press POWER again.
Note Pressing POWER turns off your device temporarily and switches
the device to sleep mode. However, you can still receive messages
and calls while your device is in the sleep mode.

Calibrate the Device

Calibrating the device screen involves tapping with the stylus the
center of a cross as it moves around the screen. This process ensures
that when you tap the screen with your stylus, the tapped item is
activated.
If your device does not accurately respond to screen taps, follow these
steps to re-calibrate it:
1. Tap Start > Settings > System tab > Screen.
2. On the General tab, tap Align Screen, and follow the instructions
on the screen.
|
18 Getting Started