Use The Review Screen; Use Zooming - QTek 9000 User Manual

H.263 (3GPP). After you capture the video file, tap
screen to send the file through MMS.

Use the Review screen

To access the icons on the Review mode screen
1. In Camera mode, tap Tools > Options > General tab.
2. Select the Review after capture check box.
Note that this check box is selected by default to allow you to review
the image or video clip after it has been captured.

Use zooming

While capturing a still image or a video clip by using the main camera,
you can zoom in to make the object in focus move closer, and you can
zoom out to make the object move farther away. In all capture modes,
use NAVIGATION on your device, or tap the triangular Up arrow next to
the Zoom Ratio indicator, to zoom in a still image or an incoming video
stream. When the zooming limit is reached, you will hear a beep. To
zoom out, press NAVIGATION down, or tap the Down arrow.
The main camera zoom range for a picture or a video clip depends on
the capture mode and capture size. Following is a summary.
|
148 Experiencing Multimedia
on the Review