QTek 9000 User Manual page 105

Once you set up a USB modem on your PC, you are ready to establish
a connection using Wireless Modem via a USB port.
To establish a connection using Wireless Modem via a USB port
1. On your device, tap Start > Programs > Wireless Modem.
2. In Connection Type, select USB.
3. Tap Start.
Note Before you tap Start, make sure your device has a GPRS SIM card
installed, and you have connected your device to a PC using the device
to PC USB connector (using the USB sync cable or cradle) and disabled
ActiveSync.
To establish a connection using Wireless Modem via Bluetooth
1. On your device, tap Start > Programs > Wireless Modem.
2. In Connection Type, tap Bluetooth.
3. Tap Start.
Notes Before you start using your device as a Bluetooth modem, make sure
that your PC is Bluetooth-enabled. You also need to check that:
• A GPRS-enabled SIM card is installed on your device.
• The ActiveSync BT port connection of your PC is disabled.
• The Infrared function is disabled.
Note the interface of the Bluetooth program installed on your PC may
vary. If so, follow the installation instructions in the manual that came
with your PC.
Getting Connected
|
105