QTek 9000 User Manual page 107

• Configure Wireless Networks screen. This screen displays the
wireless networks currently available and allows you to add new
ones if available.
Note WLAN (Wi-Fi) is the default wireless channel setting for your device.
However, GPRS starts by default if your device does not detect any Wi-
Fi signal.
To connect to a Wi-Fi network
Wireless Manager
1. Tap Start > Settings > Connections tab > Wireless WLAN.
This opens the Wireless LAN Main screen.
2. Tap to open Wireless Manager.
3. Tap On corresponding to WLAN icon (
The WLAN icon
on.
4. Tap Settings to configure and connect to a Wi-Fi network.
Note Tap on the Wireless LAN Main screen to configure wireless
networks and network adapters.
Wireless LAN
is highlighted to indicate that Wi-Fi is turned
).
Getting Connected
|
107