Toyota RAV4 2018 Manual page 576

576
7-3. Do-it-yourself maintenance
■
The initialization operation (vehicles with the tire pressure warning
system)
●
Make sure to carry out initialization after adjusting the tire inflation pres-
sure.
Also, make sure the tires are cold before carrying out initialization or tire
inflation pressure adjustment.
●
If you have accidentally turned the engine switch to the "LOCK" position
(vehicles without smart key system) or off (vehicles with smart key sys-
tem) during initialization, it is not necessary to press the reset switch
again as initialization will restart automatically when the engine switch
has been turned to the "ON" position (vehicles without smart key sys-
tem) or IGNITION ON mode (vehicles with smart key system) for the
next time.
●
If you accidentally press the reset switch when initialization is not neces-
sary, adjust the tire inflation pressure to the specified level when the
tires are cold, and conduct initialization again.
■
When initialization of the tire pressure warning system has failed (if
equipped)
Initialization can be completed in a few minutes. However, in the following
cases, the settings have not been recorded and the system will not oper-
ate properly. If repeated attempts to record tire inflation pressure settings
are unsuccessful, have the vehicle inspected by your Toyota dealer.
●
When operating the tire pressure warning reset switch, the tire pressure
warning light does not blink 3 times.
●
After driving for a certain period of time since the initialization has been
completed, the warning light comes on after blinking for 1 minute.
RAV4_OM_OM0R012U_(U)