Toyota RAV4 2018 Manual page 115

◆
Touchless sensor (vehicles with touchless power back door)
The touchless power back door enables automatic opening and
closing of the power back door by putting your foot near the lower
center part of the rear bumper and moving it away from the rear
bumper. When operating the touchless power back door, make
sure that the touchless sensor operation is enabled (→P. 701) and
that you are carrying an electronic key.
1
While carrying an electronic key, put your foot within 3.94 in. (100
mm) of the lower center part of the rear bumper and move it
away from the rear bumper, the touchless sensor detects the
movement.
When all of the doors are locked: When the movement is detected by
the touchless sensor, all of the doors will be unlocked.
2
Check to make sure that the power back door begins to operate.
To stop the power back door partway or operate it again, use the touch-
less sensor, or the wireless remote control (→P. 114), or power back
door switch (→P. 116).
RAV4_OM_OM0R012U_(U)
3-2. Opening, closing and locking the doors
115
3