Toyota RAV4 2018 Manual page 572

572
7-3. Do-it-yourself maintenance
■
How to initialize the tire pressure warning system
1
Park the vehicle in a safe place and turn the engine switch to the
"LOCK" position (vehicles without smart key system) or off (vehi-
cles with smart key system).
Initialization cannot be performed while the vehicle is moving.
2
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. (→P. 679)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
3
Turn the engine switch to the "ON" position (vehicles without
smart key system) or IGNITION ON mode (vehicles with smart
key system).
4
Press and hold the tire pres-
sure warning reset switch
until the tire pressure warn-
ing light blinks slowly 3 times.
5
Vehicles without smart key system: Wait for a few minutes with
the engine switch in the "ON" position and then turn the engine
switch to the "ACC" or "LOCK" position.
Vehicles with smart key system: Wait for a few minutes with the
engine switch in IGNITION ON mode and then turn the engine
switch off.
RAV4_OM_OM0R012U_(U)