Toyota RAV4 2018 Manual page 452

452
5-20. Bluetooth
■
Release Tones
●
A continuous tone signal is a character string that consists of numbers and
the characters p or w. (e.g.056133w0123p#1∗)
●
When the "p" pause tone is used, the tone data up until the next pause tone
will be automatically sent after 2 seconds have elapsed. When the "w"
pause tone is used, the tone data up until the next pause tone will be auto-
matically sent after a user operation is performed.
●
Release tones can be used when automated operation of a phone based
service such as an answering machine or bank phone service is desired. A
phone number with continuous tone signals can be registered in the contact
list.
●
Tone data after a "w" pause tone can be operated on voice command during
a call.
To transfer a call
Turn the "Handset mode" on to switch from a hands-free call to a cel-
lular phone call.
Turn the "Handset mode" off to switch from a cellular phone call to a
hands-free call.
Transmit volume setting
1
Select "Transmit Volume".
2
Select the desired level for the transmit volume.
3
Select "OK".
To hang up
Press the
RAV4_OM_OM0R012U_(U)
®
Phone
switch on the steering wheel or select .