B A S E F E E T - ILVE UP76 User Instructions, Installation, Maintenance

B A S E F E E T

Legs are packed in carton box. Legs should be installed near to where the appliance is to be used, as they are not
secure for long transit. After unpacking the range, raise it about a foot to remove the bottom shipping skid. Keep the
unit raised to permit legs to be screwed into our couplings and lower it gently to keep any undue strain from the legs
and internal mounting hardware. It is strongly recommended that a pallet or lift jack be used rather than tilting.
P R OF E SSI ONA L
PRESSURE GAS REGULATOR INSTALLATION INSTRUCTION
Pressure gas regulator is supplied with the appliance. It is stored in the oven.
A
Fig.2a
As s ho w in Fi g u r e 2 a , u n s crew B p ar t f rom C p art.
Sc re w B pa r t i n to A p a r t ( Fi g. 2a ). Pl ease use a prope r g a s k e t , fo r th i s c o n n e c ti o n .
As s ho w in Fi g u r e 2 b , s c re w A + B par t in t o part C .
F ig. 1c
1) Screw partially bolt (F)
into the base feet (G).
2) Insert base feet (G) into
the hole (Ha), move to the
hole (Hb) and screw com-
pletely bolt (F).
B C A
F i g. 2 b
5
C B