Change Password; Exit - PCchips M581 Series User Manual

M581 Mainboard User's Manual

Change Password

If you highlight this item and press Enter, a dialog box appears
which lets you enter a Supervisor password. You can enter no
more than six letters or numbers. Press Enter after you have typed
in the password. A second dialog box asks you to retype the
password for confirmation. Press Enter after you have retyped it
correctly. The password is then required to access the Setup Utility
or for that and at start-up, depending on the setting of the
Password Check item in Advanced Setup.
Change or Remove the Password
Highlight this item, press Enter and type in the current password.
At the next dialog box, type in the new password, or just press
Enter to disable password protection.

Exit

Highlight this item and press Enter to save the changes that you
have made in the Setup Utility configuration and exit the program.
When the Save and Exit dialog box appears, press Y to save and
exit, or press N to exit without saving.
34