en Troubleshooting
Fault
Cause and troubleshooting
The appliance door
The cleaning function locks the appliance door.
cannot be opened;
▶
lights up in the dis-
play.
The time flashes in
There has been a power cut.
the display.
▶
The time does not ap-
The basic setting has been changed.
pear in the display
▶
when the appliance is
switched off.
lights up in the dis-
Childproof lock is activated.
play and no settings
▶
can be made on the
appliance.
flashes in the dis-
The cooking compartment is too hot for the selected operation.
play and the appli-
1.
ance will not start.
2.
appears in the
The maximum cooking time has been reached. To prevent an unwanted permanent opera-
display.
tion, the appliance automatically stops heating after several hours if the settings are un-
changed.
▶
A message with ap-
Electronics fault
pears in the display,
1.
e.g.
-
.
a If the fault was a one-off, the error message disappears.
2.
HomeConnect is not
Different causes are possible.
working correctly.
▶
18.2 Replacing the oven light bulb
If the light in the cooking compartment fails, change
the oven light bulb.
Note: Heat-resistant, 40-watt, 230 V halogen bulbs are
available from the after-sales service or specialist retail-
ers. Only use these bulbs. Hold the new halogen bulbs
only with a clean, dry towel. This increases the service
life of the bulb.
WARNING ‒ Risk of burns!
The appliance and its parts that can be touched be-
come hot during use.
Caution should be exercised here in order to avoid
▶
touching heating elements.
Young children under 8 years of age must be kept
▶
away from the appliance.
24
All manuals and user guides at all-guidesbox.com
Allow the appliance to cool down until
→ "Self-cleaning ", Page 20
Reset the time.
→ "Setting the time on the clock", Page 11
Change the basic setting for the time display.
→ "Basic settings", Page 15
Use the
button to deactivate the childproof lock.
→ "Childproof lock", Page 15
Switch off the appliance and allow it to cool down.
Restart the operation.
Switch off the appliance.
You can configure new settings if required.
Tip: To prevent the appliance from switching off when you do not want it to, e.g. for an
extremely long preparation time, set a cooking time.
→ "Time-setting options", Page 10
Press the
button.
If required, reset the time.
‒
If the error message appears again, call the after-sales service. Quote the exact error
message and the E no. of your appliance.
→ "Customer Service", Page 25
Go to www.home-connect.com.
goes out in the display.
WARNING ‒ Risk of electric shock!
When changing the bulb, the bulb socket contacts are
live.
Before replacing the bulb, ensure that the appliance
▶
is switched off in order to prevent a potential electric
shock.
Also unplug the appliance from the mains or switch
▶
off the circuit breaker in the fuse box.
Requirements
¡ The appliance is disconnected from the power sup-
ply.
¡ The cooking compartment has cooled down.
¡ You have a new halogen bulb to replace the old one.
Place a tea towel in the cooking compartment to
1.
prevent damage.
Turn the glass cover anti-clockwise to remove it .
2.