Broadcast Tools RM-3 Installation And Operation Manual

Rack mount

Download this manual

Installation and Operation Manual

RM-3

Rack Mount

RM-3 rack mount shown with two installed products and bracket.

Screws enclosed.

Product not included.

Due to the dynamic nature of product design, the information contained in this

document is subject to change without notice. Broadcast Tools, Inc., assumes no

responsibility for errors and/or omissions contained in this document. Revisions

of this information or new editions may be issued to incorporate such changes.

Broadcast Tools® is a registered trademark of Broadcast Tools, Inc.

No part of this document may be reproduced or distributed without permission.

Visit www.broadcasttools.com for important product update information.

Need help?

Do you have a question about the RM-3 and is the answer not in the manual?

Page 1 Product not included. Due to the dynamic nature of product design, the information contained in this document is subject to change without notice. Broadcast Tools, Inc., assumes no responsibility for errors and/or omissions contained in this document. Revisions of this information or new editions may be issued to incorporate such changes.
Page 2 RM-3 Installation and Operation Manual DESCRIPTION CAUTION! RM-3 allows mounting of one or two small profile type BTI products horizon- Broadcast Tools® tally in one rack space. The blue rack shelf is flanged for strength and is Products, as with any equipped with eight 6-32 stand-offs.
Page 3 If Broadcast Tools is notified, in writing, of a failure of any item manufactured by Broadcast Tools to conform to the foregoing Limited Warranty within one (1) year following the date of the Buyer’s acquisition of the item, and if the item is returned to Broadcast Tools in accordance with Broadcast Tools’...