Paper Jam In The Rear Door - Source Technologies ST9817 Quick Reference Manual

4
Remove the imaging unit.
Warning—Potential Damage: Do not expose the imaging
unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drum. Doing so may affect the quality of
future print jobs.
5
Remove the jammed paper.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
Note: Make sure that all paper fragments are removed.
6
Insert the imaging unit.
Note: Use the arrows inside the printer as guides.
11401A Granite Street | Charlotte, NC | 800.922.8501 | Sourcetech.com
6
7 Insert the toner cartridge.
Note: Use the arrows inside the printer as guides.
8
Close the door.
9
Insert the tray.

Paper jam in the rear door

1
Open the rear door.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.