Sound - Doro 5861 Manual

2. Select Auto select to select network automatically or Manual select
to select network manually and a list of available network operators is
displayed (after a short delay). Select desired operator and press .
IMPORTANT!
If you select a network manually, your phone will lose network
connection when the selected network is out of reach. Remember to set
Auto select.
Network type
Your phone automatically switches between the mobile networks that are
available where you are. You can also manually set your phone to use a
specific mobile network type. Different status icons are displayed in the
status bar depending on the type of network that you are connected to.
Press Menu
Settings
4G/3G/2G: to automatically switch for best service between 2G, 3G
•
and 4G.
3G/2G: to automatically switch for best service between 2G and 3G.
•
2G: for 2G service only.
•
IMPORTANT!
If you set your phone to use 3G/2G or 2G, you will not be able to make
any calls, including emergency calls, or use other features requiring a
network connection, if the selected network type is unavailable.
VoLTE
Set if voice calling over LTE (4G) network should be enabled or disabled.
This menu is only visible if your service provider supports the feature.
1. Press Menu
2. Check SIM to activate it.
Note! Your network operator also needs to support this feature.

Sound

Audio setup
If you use a hearing aid or have hearing difficulties when using the device
in a noisy environment, you can adjust the audio settings.
1. Press Menu
English
Connections
Settings Connections
Settings Sound
42
Network type:
VoLTE.
Audio setup: