Table of Contents
Advertisement
Receive a call
1.
Press
Press
2.
Press
Tip: Press + or – to temporarily switch off the ring signal.
Call information
During a call, the outgoing or incoming phone number and the elapsed call
time is displayed. If the identity of the caller is withheld or unknown, Pri-
vate or Unknown are displayed.
Call options
Mute
During a call, press
mute to re-enable the microphone.
Loudspeaker
During a call, press the right softkey Speaker to activate loudspeaker
mode. Speak clearly into the phone microphone at a maximum distance of
1 m. Press the right softkey Speaker to deactivate loudspeaker mode.
Options
During a call the options button ( ) give access to additional functions.
•
Add call to call another number. When the second party is connected
you can again press
Merge calls/Split call conference to merge the two calls into a
•
conference call and then split them again if needed.
Swap to swap between the two calls.
•
Transfer to merge the two calls and disconnect yourself.
•
Hold call/Retrieve call to hold/retrieve the current call.
•
Mute to disable the microphone. See above.
•
•
End single call to end the current call (same as
•
End all calls to end all current calls.
Note! For settings related to calling, see Calls, p.37
to answer.
to reject the call (busy signal).
to end the call.
Mute to disable the microphone. Press
and then press:
English
12
Un-
).
Advertisement
Table of Contents
