multicomp pro MP710080 User Manual page 8

Tracking Output Over Voltage Protection (OVP)
This is to protect the connected load in the event that the output voltage control circuit malfunctions, the maximum
output voltage will not exceed 30% of the adjusted voltage value at the time of the operation.
Over Temperature Protection
When the temperature inside the power supply becomes higher than a pre-determined value, the output voltage
and current of the power supply will automatically decrease to zero to prevent damage to power supply. When the
temperature inside the power supply returns to normal then the power supply will automatically return to operation
again.
PC CONNECTION
The power supply with USB can be remote control using Windows PC. Connecting the power supply to a PC using
provided USB cable as following connection diagram.
If you need to install a USB driver for power supply connection. Drivers are available to download from the
Farnell product web page.
There are two methods for remote control of the power supply. You can use provided control software or use
your own program with command set provided in this manual.
The PC control software can be downloaded from Farnell product web page.
For the detail usage of driver and PC software. Please refer to PC software manual.
PC software manual is also available to download from the Farnell product web page.