End Of Cooking Time - Gaggenau BMP 251 Instruction Manual

Switching off:
To cancel the operation and delete the settings, turn the
function selector to 0.
Notes
‒ The sequential operation can be extended using the
combination mode.
‒ You can only select the 1000 W microwave power
setting once.
‒ The oven heating types cannot be combined with
the 1000 W microwave power setting.
‒ The sequence of each setting is entirely up to you.
You can start with the cooking time, microwave
power or oven heating type.
‒ If you open the appliance door during cooking, the
fan may continue to run.

End of cooking time

In oven mode, you can delay the cooking time end to a
later time. This function is not available when using the
microwave.
For example: It is 14:00. The meal requires a cooking
time of 40 minutes. You want it to be ready by 15:30.
You enter the cooking time and delay the cooking time
end to 15:30. The electronics calculates the starting
time. The appliance automatically starts at 14:50 and
switches off at 15:30.
Note that food which is easily spoiled must not remain in
the oven for too long.
Delaying the cooking time end
You have set the heating type, temperature and cooking
time.
C
1 Touch to select the "Cooking time end"
function.
2 Use the rotary selector to set the required cooking
time end.
Touch ™ to confirm.
3
A note appears in the display, stating that a cooking
time end has been set. Touch ™ to confirm.
16
4 Touch
The appliance goes into standby mode. The display
shows the operating mode, the temperature, the
cooking time and the remaining time until the start. The
appliance starts at the calculated time and automatically
switches off once the cooking time has elapsed.
The appliance switches off once the cooking time has
elapsed. An audible signal sounds. The signal stops
prematurely if you touch the ™ symbol, open the
appliance door or set the function selector to 0. The
sequential operation has finished.
Changing the cooking time:
Touch the
6
time" function. Use the rotary selector to set the
required cooking time. Touch ™ to confirm. Touch
start.
Changing the cooking end time:
Touch the
time end"
required cooking time end. Touch ™ to confirm. Touch
I
to start.
Deleting settings:
Touch the ' symbol.
Cancelling the entire process:
5
Set the function selector to 0.
I
to start.
H C
symbol. Touch to select the "Cooking
H C
symbol. Touch to select the "Cooking
5
function. Use the rotary selector to set the
I
to