Entering Names; Starting Recipes; Change Recipe - Gaggenau BMP 251 Instruction Manual

C
8 Use the symbol to select the first phase.
The heating type that was set at the start is
displayed. You can use the function selector to
change the heating type. Operation is possible in
combination mode (see the section
).
mode
9 Use the rotary selector to set the microwave
cooking time, temperature or grill setting.
C
10 Use the symbol to select the next phase.
- or -
If preparation is complete, finish making entries.
11 Touch ™ to save.
- or -
Touch ' to cancel and exit the menu.

Entering names

1 Enter the name of the recipe in "ABC".
Rotary selec- Select letters
tor
A new word always begins with a capital let-
ter.
4
Press briefly: moves the cursor right
Press and hold: shifts to umlauts and special
characters
Press twice: accepts the change
5 Press briefly: moves the cursor right
Press and hold: shift to normal characters
Press twice: accepts the change
l Deletes letters
Save with ™.
2
- or -
Cancel with ' and exit the menu.
Note: For entering a name, Latin characters, certain
special characters and numbers are available.

Starting recipes

1
Combination
2
3
4
5
Note: You can set the temperature, grill setting for a
type of oven heating and the cooking time for a
microwave output using the rotary selector while the
recipe is in progress. This does not change the saved
recipe.

Change recipe

You can change the settings of a recorded or
programmed recipe.
1
2
3
4
5
6
7
Set the function selector to the desired type of
heating.
The i symbol is displayed.
Touch the i symbol and select "Individual recipes"
using the rotary selector.
Confirm with ™.
Use the rotary selector to select the desired recipe.
I
Press to start.
Operation starts. The cooking time starts counting
down in the display.
The settings for each phase are shown in the
display.
Turn the function selector to any type of heating.
The i symbol is displayed.
Touch the i symbol and use the rotary selector to
select "Individual recipes".
Touch ™ to confirm.
Use the rotary selector to select the desired recipe.
Touch the % symbol.
C
Use the symbol to select the required phase.
The settings are displayed. You can use the rotary
selector or function selector to change the settings.
Touch ™ to save.
- or -
Touch ' to cancel and exit the menu.
21