Tco Certified - NEC MultiSync E224FL User Manual

TCO Certified

TCO Certified — a third-party sustainability certification for IT products
TCO Certified is a global sustainability certification for IT products, available for computers, mobile devices, display products and data center
products. Criteria cover both social and environmental sustainability and enable circular solutions. Compliance with criteria is independently
verified. TCO Certified is a third-party certification in accordance with ISO 14024.
To see a list of our TCO certified monitors and their TCO Certification (in English only), visit our website at:
https://www.sharp-nec-displays.com/global/about/legal_regulation/TCO_mn/index.html
CAUTIOON:
Please refer to


• The intended primary use of this product is as an Information Technical Equipment in an office or domestic environment.
• The product is intended to be connected to a computer and is not intended for the display of television broadcast signals.
Registration Information
NEC is a registered trademark of NEC Corporation.
DisplayPort™ and the DisplayPort™ logo are trademarks owned by the Video Electronics Standards Association (VESA
in the United States and other countries.
MultiSync is a trademark or registered trademark of Sharp NEC Display Solutions, Ltd. in Japan and other countries.
®
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States
® ®
and/or other countries.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the
HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
USB Type-C and USB-C are registered trademarks of USB Implementers Forum.
® ®
All other brands and product names are trademarks or registered trademarks of their respective owners.
OOTEN
(1) The contents of this manual may not be reprinted in part or whole without permission.


(2) The contents of this manual are subject to change without notice.
(3) Great care has been taken in the preparation of this manual; however, should you notice any questionable points, errors or
omissions, please contact us.
(4) The image shown in this manual is indicative only. If there is inconsistency between the image and the actual product, the actual
product shall govern.
(5) Notwithstanding articles (3) and (4), we will not be responsible for any claims on loss of profit or other matters deemed to result
from using this device.
(6) This manual is commonly provided to all regions so they may contain descriptions that are pertinent for other countries.
(For Customers in U.K.)
• The wires in this mains lead are coloured in accordance with the
following code:
NREEO-AOD-YELLO
N "Earth"
BLUEN
BRO
ON
• As the colours of the wires in the mains lead of this apparatus may not
correspond with the coloured markings identifying the terminals in your
plug proceed as follows:
• The wire which is coloured GREEN-AND-YELLOW must be
connected to the terminal in the plug which is marked by the letter E
or by the safety earth symbol
yellow.
• The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter O or coloured black.
• The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured red.
• Ensure that your equipment is connected correctly. If you are in any
doubt consult a qualified electrician.
"
AROIONN THIS APPARATUS MUST BE EARTHED."
"CAUTION 2".
IMPORTAOT
"Oeutral"
"Live"
or coloured green or green-and-
English−2
)
®