Lighting Instructions - Landmann 42125 Assembly, Care And Use Instructions

Prior to the first use, it is important to clean your grill
with heat. This will clean the internal parts by burning
off any residue and odor from the manufacturing
process. To perform this cleaning, operate the grill for
approximately 30 minutes at the highest heat setting
with the lid closed.
IMPOrTANT
Please read these instructions before attempting to
light the grill.
Failure to open the lid before igniting
may result in an explosive flare-up,
which can cause serious bodily
injury or death.
DO NOT lean over the open grill
when lighting.
1. Turn all gas control knobs to the
2. Turn on gas valve from gas source.
3. Lid MUST be open when lighting.
4. To ignite a burner, push and turn any control knob
to the HIGH position.
5. Press and hold the
light the selected burner.
6. If the burner does NOT ignite in five seconds, turn
the burner control knob to the
wait at least five minutes for the gas to clear and
repeat this lighting procedure.
Failure to follow the five-minute
waiting period may result in an
explosive flare-up, which can cause
serious bodily injury or death.
7. To extinguish the burner, push in the control
knob(s) and turn clockwise to the

Lighting Instructions

OFF position.
electronic igniter button to
OFF position,
OFF position.
Match Lighting
Note: Match lighting tool (W) is located on the inside
of the door (K).
1. Turn all gas control knobs to the OFF position.
2. Turn on gas valve from gas source.
3. Lid MUST be open when lighting.
4. Remove the match lighting tool and stick a match
into the end of the tool.
5. Light the match.
6. Once lit, guide the lit match under the grate.
7. Push in and turn the control knob to HIGH for the
burner closest to the light match. The burner should
light immediately.
8. Adjust burner control knob to the desired cooking
temperature.
16