Doro 8200 Manual page 32

1. From the Home screen, tap
My mobile data settings.
2. Switch
Note! You can easily turn on and off Mobile data from the quick settings in
the notification panel. To open the notification panel, swipe the status bar
down.
Tip: Contact your service provider for detailed subscription costs before
activating.
Network services and costs
Your device is approved for use on the 4G LTE FDD: 1 (2100), 2 (1900), 3
(1800), 7 (2600), 8 (900), 20 (800), 28 (700) MHz / 4G LTE FDD: 38 (2600),
40 (2300) MHz / WCDMA: 1 (2100), 2 (1900), 5 (850), 8 (900) MHz / GSM:
850, 900, 1800, 1900 MHz networks. To use the device, you need a sub-
scription with a service provider.
Using network services may result in traffic costs. Some product features
require support from the network, and you may need to subscribe to them.
Some operations and features are SIM card and/or network dependent or
dependent on the compatibility of devices and the content formats sup-
ported. Some services are subject to a separate charge.
Data roaming On or Off
When you travel with your device and you are switched from your own
network operator's network to another, it's called roaming. The roaming
state allows you to be reachable and you can make or receive phone calls
regardless of where you are, but it almost always involves a surcharge for
using another operator's network. If you need to access the Internet or
other data services using mobile data traffic, then you need to activate da-
ta roaming. To limit your data usage when abroad roaming is Off as default.
Tip: R is shown in the status bar when roaming.
Your phone can still access the Internet over the Wi-Fi connection even if
you disable roaming.
Note! Using data services while roaming can be very costly. Contact your
service provider for data roaming rates before you use data roaming.
to enable or disable.
English
Set My internet connection
25