Manual Operation - LightwaveRF Megaman Connect Series Instruction Manual

Manual operation

• Plug the LightwaveRF Plug-in Dimmer
Socket into a standard 13A wall socket and
ensure that the wall socket is turned on.
• Plug a working portable lamp into the
Plug-in Dimmer and ensure that it is
turned on. The LED on the Plug-in will
illuminate amber to illustrate that it has
detected a 'load' (working lamp).
IMPORTANT: The Plug-in Dimmer Socket will NOT function and the amber
LED will not illuminate unless there is a suitable, working lamp plugged in
to provide a load and form a connected circuit. The lamp must be turned on.
• Press and release the manual button to
toggle the Plug-in between the o
on state (amber LED indicator will turn
blue and vice-versa).
NOTE: When turned on, The Plug-in will
dim to the level it was at when turned o .
Manual Operation
and
Manual button