Summary of Contents for LightwaveRF Megaman Connect Series
Page 1
Plug-in Dimmer Socket Kit Model No. JSJSLW301 Instruction Manual Connect Series www.lightwaverf.house Version 2...
Page 2
EN 55022: 2010, EN 61000-3-2: 2006 +A1: 2009 +A2: 2009 Class A, EN 61000-3-3: 2008, EN61000-4-2: 2009, EN 61000-4-3: 2006 +A1: 2008 +A2: 2010, EN 61000-4-4: 2012, EN 61000-4-5: 2006, EN 61000-4-6: 2009, EN 61000-4-11: 2004 For and on behalf of LightwaveRF PLC ---------------------------------------- Name J Shermer...
/ tablet (requires the Lightwave Link). Help video & further guidance For additional guidance, and to watch a video that will help guide you through the installation process, please visit the support section on www.lightwaverf.house...
Buttons LED. Blue when power is on / amber Bank Selector when o IMPORTANT: Please retain these instructions for guidance on how to link Remote Handsets and other LightwaveRF controllers. For additional guidance please visit the support section on www.lightwaverf.house.
Before you begin setting up and using the Plug-in Dimmer, you must ensure that you have compatible lamps (bulbs). Ensuring the compatibility of your lamps with LightwaveRF Plug-in Dimmers will ensure that you get the best experience from your lighting setup.
Page 6
Device Setup Linking the plug-in to LightwaveRF controllers LightwaveRF plug-ins each have 6 unique memory slots which means they can link with up to 6 seperate LightwaveRF controllers in total. NOTE: If you are using a smartphone/tablet/PC to control the Plug-in via the Lightwave Link, this will always count as ONE controller and take up one memory slot even if you are using multiple smartphones/tablets.
Page 7
Device Setup NOTE: Linking mode lasts for 12 seconds; if no signal is received from a remote handset during this time then the Plug-in will automatically exit linking mode without linking the device. If, when expecting a quick flashing blue LED to confirm pairing, a slow amber flash is received instead, then the Plug-in memory is FULL and no further remotes may be linked with it unless one of the existing remotes is unpaired first (see below).
Page 8
If the distance between the transmitter and receiver is too great to achieve reliable operation, the LightwaveRF Signal Booster may be used in conjunction with this product to increase the range.
Manual Operation Manual operation • Plug the LightwaveRF Plug-in Dimmer Socket into a standard 13A wall socket and ensure that the wall socket is turned on. • Plug a working portable lamp into the Plug-in Dimmer and ensure that it is turned on.
Remote Operation Control with a LightwaveRF controller or smartphone • Press ‘on’ button controller, Smartphone or Web App once to switch the Plug-in Dimmer on (LED indicator will illuminate blue). Hold the button to increase light level. • Press ‘o ’...
Page 11
Remote Operation The mood buttons allow the Plug-in Dimmers (and/or other LightwaveRF devices) that are linked to the Mood Remote to be grouped together on one button command. When saving a mood on the Mood Remote, the status of any linked devices (i.e.
Page 12
1. (Easy): Family Safety Products Required: Plug-in dimmer, PIR motion sensor Here we have a LightwaveRF plug-in dimmer paired to a PIR Motion Sensor. When somebody is detected by the sensor, it triggers the plug-in automatically and turns a lamp on. So, when one of the kids needs to use the bathroom in the middle of the night, the path is safely lit for them.
Page 13
Creative Ideas for Plug-in Dimmers 2. (Intermediate): Scene lighting Required: Dimmer(s), Mood Controller, plug-ins Dimmer switches & dimmable plug-ins enable you to control all of your lounge ceiling lights and socket powered lamps individually or together as a group. The Mood Controller allows you to set and recall your own favourite lighting scenes at the touch of a button.
Page 14
This setup gives you control over your devices from anywhere in the world. Here we have ceiling lights controlled by dimmers and lamps plugged into LightwaveRF power sockets or plug-in dimmers. Via the Lightwave Link, every light can be controlled using a smartphone wherever you are. So, when you’re away on holiday, you can turn on lights to make it look like someone’s...
The Plug-in is locked. This may have been done using a Socket Locker or from the LightwaveRF app. If it is locked on, then the Plug-in will not turn o manually. If it is locked o , the Plug-in will not turn on manually.
Page 16
(possibly because the lamp has failed) the LED will not illuminate and the Plug-in will not function. If these measures fail contact technical support via www.lightwaverf.house. Problem: The Plug-in is powered (LEDs is on), but it will not link to a LightwaveRF Handset or controller.
Page 17
Can I use the Plug-in with LED lamps? No. The Plug-in Dimmer does not currently work with LED lamps. If you wish to control LED lamps, you can use a LightwaveRF Plug-in On/O Socket instead. Can I use the Plug-in to control electrical devices other than lamps?
Page 18
FAQs Does the Plug-in work manually as a standalone unit? Yes the Plug-in will operate manually. Does the Plug-in have a ‘standby’ power consumption The Plug-in has a standby power consumption of approx. 0.5W. This is because the in-built radio receiver requires power in order to receive commands.
Technical Specification Specification RF frequency: 433.92 MHz Input rating: 220-240V~ 50Hz. Output rating: 40W Min. 300W Max. Standby Energy Use: Less than 1W Warranty: 2 year standard warranty...
Page 20
Version 2 2 Quadrant Park Mundells Welwyn Garden City Herts AL7 1FS 01707 386035 www.lightwaverf.house...