Table of Contents
Advertisement
Remote Operation
The mood buttons allow the Plug-in Dimmers (and/or other LightwaveRF
devices) that are linked to the Mood Remote to be grouped together on
one button command.
When saving a mood on the Mood Remote, the status of any linked
devices (i.e. on or o
and the dim level) is also saved. This means that,
when one of the mood buttons is pressed, the saved status is recalled.
This is useful for saving and recalling a favourite lighting scene, or for
turning o all Plug-ins at once using the 'all o ' button.
Setting and recalling a mood
1. Ensure that all plug-ins and/or other devices that need to be included
in the mood are already linked to the remote (on any bank).
2. Using the remote, or by manual operation, set the linked devices to the
status that you want to be saved (i.e. on or o and dim level).
3. Choose any of the 3 mood buttons (not the 'all o ' button), press and
hold it until the LED indicators on the linked devices flash in recognition.
The mood is now saved. To make changes simply repeat the process.
4. Press and release the mood button to recall the saved mood. Press the
'all o ' button to turn o all linked devices.
Advertisement
Table of Contents
