Table of Contents
Advertisement
FAQs
Q.
Does the Plug-in work manually as a standalone unit?
A.
Yes the Plug-in will operate manually.
Q.
Does the Plug-in have a 'standby' power consumption
A.
The Plug-in has a standby power consumption of approx. 0.5W. This is
because the in-built radio receiver requires power in order to receive
commands. This rate is low & well within government energy guidelines.
Q.
Can I use the Plug-in in a multiblock?
A.
Yes. However, make sure that Plug-ins are not positioned directly next to
each other as this could cause radio conflict. Try to ensure that the Plug-ins
are positioned 30cm apart for optimum performance.
Q.
Is it possible to overload the Plug-in?
A.
Yes. There is a limit of 300W; exceeding this could damage the unit.
Q.
How many devices can I have on the Lightwave system?
A.
Each device has 6 memory slots for up 6 controllers. Note: The Lightwave
Link allows a number of di erent smartphones to control the Plug-in indepen-
dently, however it only uses one memory slot.
Advertisement
Table of Contents
