How do I get started?
Refer to the setup guide on the following pages
to get going. No specialist knowledge or tools
are required as these sockets are 'plug and play';
however, always remember to take care when
dealing with mains electricity.
How does it work?
The Plug-in Dimmer is designed to plug into any
standard 13A socket. It allows any connected
lamp (up to 300W) to be turned on and o
dimmed using the remote control included in this
pack, or by using a smartphone / tablet
(requires the Lightwave Link).
Help video & further guidance
For additional guidance, and to watch a video
that will help guide you through the installation
process, please visit the support section on
www.lightwaverf.house
Get Started
and