Table of Contents
Advertisement
Quick Start Guide
Device Setup
Linking the plug-in to LightwaveRF controllers
LightwaveRF plug-ins each have 6 unique memory slots which means they
can link with up to 6 seperate LightwaveRF controllers in total.
NOTE: If you are using a smartphone/tablet/PC to control the Plug-in via the
Lightwave Link, this will always count as ONE controller and take up one
memory slot even if you are using multiple smartphones/tablets.
1.
On the Plug-in, press and hold
down the manual button until the
LED flashes blue/amber alternately.
The Plug-in is now in linking mode.
2.
Using a LightwaveRF controller
(such as the Mood Remote provided),
Smartphone or Web App, press the
button intended to be linked (the 'on'
button on the Mood Remote); the
LED will flash blue to confirm that the
remote is now linked. If you are using
a LightwaveRF App, please refer to
in-App help for guidance.
Advertisement
Table of Contents
