Table of Contents
Advertisement
Device Setup
Clearing memory (will remove all linked remotes):
1. Press and hold down the manual
button until the LED flashes blue and
amber alternately, and then release it.
The Plug-in is now in linking mode.
2. On the Plug-in, press and hold down
the manual button again until the LED
flashes purple, then tap (don't hold) the
Manual button a further time; the LED
will flash amber quickly to confirm that
the memory has been cleared.
NOTE: Reliable range of operation is around 15 metres indoors and up to
100m outdoors using the Lightwave Link. This figure may vary depending
upon the environment; very thick walls, bodies of water or large metal
objects may interfere with radio range.
If the distance between the transmitter and receiver is too great to achieve
reliable operation, the LightwaveRF Signal Booster may be used in
conjunction with this product to increase the range.
Advertisement
Table of Contents
