Beko WTE 11735 XCMST User Manual page 28

Table of Contents

Advertisement

Available languages

Available languages

Problem
Foam is overflowing from the
detergent drawer.
Laundry remains wet at the end of
the programme. (*)
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine
and to its surrounding environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.4.2
A
CAUTION:
Authorized Service Agent. Never try to repair a nonfunctional product yourself.
28 / EN
Reason
Too much detergent is used.
Excessive foam might have occurred and automatic
foam absorption system might have been activated
due to too much detergent usage.
If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the
Solution
• Mix 1 tablespoonful softener and ½ l water and
pour into the main wash compartment of the
detergent drawer.
• Put detergent into the machine suitable for the
programmes and maximum loads indicated in the
"Programme and consumption table". When you
use additional chemicals (stain removers, bleachs
and etc), reduce the amount of detergent.
• Use recommended amount of detergent.
Washing Machine / User's Manual

Advertisement

Table of Contents
loading

Table of Contents