Sewing Stretch Fabrics And Elastic Tape; Stretch Stitching; Elastic Attaching - Brother 888-L01 Operation Manual

Hide thumbs Also See for 888-L01:
Table of Contents

Advertisement

Sewing Stretch Fabrics and Elastic Tape

Sewing Stretch Fabrics and Elastic Tape
• Using the table below, refer to "Using the utility
stitch tables in the "Sewing" section" in the "Basic
operations" section.
Stitch name
Stitch
Stem stitch
2 steps elastic zigzag
stitch
3 steps elastic zigzag
stitch
Tape attaching stitch
* Stitch patterns can be selected directly by pressing the
numeric keys on the machine during preset utility stitch
mode. Refer to "Basic operations" section.

Stretch stitching

a
Attach zigzag foot "J".
b
Select stitch .
Sew the fabric without stretching it.
c

Elastic attaching

When elastic tape is attached to the cuff or waist of a piece of
clothing, the finished dimensions will be that of the stretched
elastic tape. Therefore, it is necessary that a suitable length of
the elastic tape be used.
S-26
Stitch number
*
*
1-06
06
06
1-13
13
11
J
*
*
1-14
14
12
2-13
48
42
J
a
Pin the elastic tape to the wrong side of the fabric.
Pin the elastic tape to the fabric at a few points to make
sure that the tape is uniformly positioned on the fabric.
1
2
1 Elastic tape
2 Pin
b
Attach zigzag foot "J".
c
Select a stitch.
d
Sew the elastic tape to the fabric while stretching the
tape so that it is the same length as the fabric.
While pulling the fabric behind the presser foot with
your left hand, pull the fabric at the pin nearest the front
of the presser foot with your right hand.
CAUTION
• When sewing, be sure that the needle does not
touch any pins, otherwise the needle may bend
or break.
J

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

888-l03888-k02

Table of Contents