Fisher & Paykel OR60 Installation Instructions And User Manual page 25

Care and cleaning
23
Burner parts and pan supports
You can remove and clean these parts with hot soapy water or non-abrasive detergents. Clean
spills regularly before they become burnt on. Do not wash these parts in a dishwasher.
After cleaning, check that the burners and their flame spreaders are dry before replacing
correctly.
It is very important to check that the burner flame spreader and the cap have been correctly
positioned. Failure to do so can cause serious problems.
Note: To avoid damage to the electric ignition do not try to light the cooktop when the burners
are not in place.
Replacing the burners
Carefully replace the burner parts as per the following figures.
Check that the ignitor is always clean to ensure trouble-free sparking. Clean it carefully with a
toothbrush and methylated spirits.
Cap
Flame
spreader
Ignitor
Figure 20 Auxiliary and semi-rapid burner parts Figure 21 Replacing the auxiliary and semi-rapid burners