Residual Heat Indicator; Operating The Appliance; First-Time Use; Switching The Hob On And Off - Siemens EX9 KX Series Instruction Manual

en

Operating the appliance

Cooking modes menu
The hob has a number of different cooking modes.
Cooking mode Function
Allows you to select the heat setting for
" Heat settings
the cooking zone.
The wireless cooking sensor automati-
» Cooking functions
cally detects the temperature as cooking
progresses.
Note:
once the wireless cooking sensor is con-
nected to the control panel.
The hob automatically detects the tem-
Õ Frying sensor
perature as frying progresses.
The temperature is adjusted by changing
powerMove
ÿ
the position of the cookware on the cook-
ing zones.
A preset list of dishes for braising and
/ Dish assistant
boiling.
To navigate to the Cooking modes menu, select the
cooking zone and touch the active cooking mode.

Residual heat indicator

The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch
the hotplate while the residual heat indicator
or immediately after it goes out.
When the hotplate is switched off, the residual heat
indicator will light up. Even after the hob has been
switched off, the residual heat indicator will remain lit as
long as the hotplate is still warm.
12
This function will be ready to use
f
is still lit
1Operating the appliance
T his chapter explains how to set a hotplate. The table
O p e r a t i n g t h e a p p l i a n c e
shows heat settings and cooking times for various
meals.

First-time use

When you switch on the appliance for the first time, the
menu for implementing the initial settings appears in the
display panel.
The main screen is then displayed.
Note: You can change the language and any other
setting at any time. You can find further information on
selecting the language in section ~ "Basic settings".

Switching the hob on and off

Switch the hob on and off using the main switch.
To switch on: Touch the
the touch display lights up. After a short switch-on time,
the hob will be ready for operation.
To switch off: Touch the
beside the main switch goes out. The residual heat
indicator remains lit until the cooking zones have
cooled down sufficiently.
Notes
The hob automatically switches off if all cooking
■
zones have been switched off for more than
30 seconds.
The selected settings are stored for 10 minutes after
■
the hob has been switched off. If the hob is switched
back on within this time, the previous settings are
retained. Section ~ "Basic settings" contains
information about changing the time in which the
selected settings are saved.

Setting the cooking zone

Set the required power setting from 1 to 9.
Power setting 1 = lowest setting.
Power setting 9 = highest setting.
Each power setting has an intermediate level.
Notes
To protect the fragile parts of your appliance from
■
overheating and electrical overloading, the hob may
temporarily reduce the power.
In order to prevent the appliance from producing
■
excess noise, the hob may temporarily reduce the
power.
#
sensor. A signal sounds and
# symbol until the indicator