Table of Contents
Advertisement
The hotplates
Hotplate
Single hotplate
$
Grill zone
æ
Resistive plate-warming zone*
¹
* Turning on the hotplate: The corresponding indicator lights up.
Only use pans suitable for induction cooking, see the "Appropriate cookware" section.
Residual heat indicator
The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.
Programming the hob
This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.
Switching the hob on and off
The hob is turned on and off with the main switch.
To switch on: press the
#
main switch lights up. The hob is ready for use.
To switch off: press the
#
main switch disappears. All hotplates are off. The residual heat
indicator stays on until the hotplates have cooled down
completely.
Note: The hob switches off automatically when all the hotplates
are switched off for more than 20 seconds.
Setting the hotplate
The desired power level is set in the programming panel.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
Cooking guidelines
The table below contains some examples.
The cooking times depend on the power level, type, weight and
quality of the food. As such they are approximate.
Power levels influence the cooking results.
Melt
Chocolate, chocolate coating, butter, honey
Gelatine
* Continue cooking without a lid
** Uncovered
Turning on and off
Use a correctly sized pan.
The hotplate turns on automatically when a pan the same size as its outer
edges is placed on it.
Press the
symbol. The indicator above the
symbol until the indicator above the
symbol.
Ù
Even when switched off, the
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
indicators and the selected power level will appear alternately.
Selecting the power level
The hob must be switched on.
Selecting the hotplate: Touch the programming panel for the
1.
required hotplate.
Within the next 10 seconds, slide a finger on the
2.
programming panel until the desired power level lights up.
Changing the power level
Slide your finger along the programming panel until the
required power level is displayed.
Switch off the hotplate
Select the required hotplate and power level
turns off and the residual heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.
Remove purées, creams and thick sauces from time to time, if
they get too hot.
Use power level 9 to begin cooking.
Ongoing cooking
setting
1-1.
1-1.
/
light will remain on as long as
œ
•
‹
. The hotplate
Ongoing cooking time
in minutes
-
-
œ
/
•
7
Advertisement
Table of Contents
