Dish Assistant; Preparing And Maintaining The Wireless Temperature; Wireless Temperature Sensor; Sensor - Siemens EX9 KX Series Instruction Manual

en

Wireless temperature sensor

Dish assistant

This function can be used to cook a wide variety of
food.The appliance will choose the optimal setting for
you.
Selecting and setting the programme
Select a hotplate.
1.
Touch the active cooking mode and select the Dish
2.
assistant option.
Select the programme group you require.
3.
Select the type of food you want to cook.
4.
You will be guided through the entire setting procedure
for the food you have selected, and will be provided
with information on how to cook it.
Cancelling a programme
To cancel a programme, select power setting 0 or
change the type of heating.
36
‚Wireless temperature

sensor

W i r e l e s s t e m p e r a t u r e s e n s o r
You will need to connect the wireless temperature
sensor to the control panel before using the cooking
functions for the first time.
Preparing and maintaining the wireless
temperature sensor
This section provides information on:
Adhering the silicone patch
■
Using the wireless cooking sensor
■
Cleaning
■
Changing the battery
■
The silicone patch and the cooking sensor can be
purchased at a later time from specialist retailers, our
technical after-sales service or our official website. To
do this, quote the relevant reference number:
00577921 Set of 5 silicone patches
HZ39050 Cooking sensor and set of 5 silicone patches
Adhering the silicone patch
The silicone patch attaches the temperature sensor to
the cookware.
When a pan is used for the first time with the cooking
functions, the silicone patch must be adhered directly to
the pan. It is important
That the adhesive area on the pan is free from
1.
grease. Clean the pan, dry it thoroughly and wipe the
adhesive area with a spirit.
Remove the protective film from the silicone patch.
2.
Adhere the silicone patch to the outside of the pan in
the correct place using the enclosed template as a
guide.
Press down all over the surface of the silicone patch,
3.
including in the centre.
The adhesive requires one hour to fully harden. Do not
use or clean the pan during this time.
Notes
Do not leave the pan with the silicone patch to soak
■
soapy water for long periods of time.
If the silicone patch comes off, attach a new one.
■