Hood Control Settings - Siemens EX9 KX Series Instruction Manual

Hide thumbs Also See for EX9 KX Series:
Table of Contents

Advertisement

Deactivating
I
Touch the
symbol in the settings area.
1.
Select fan setting 0.
2.
The fan has been deactivated.
Setting automatic mode
Activation
I
Touch the
symbol in the settings area.
1.
Select
!
.
2.
Automatic mode is activated.
The fan starts automatically when steam is produced.
Deactivating
I
Touch the
symbol in the settings area.
1.
Select fan setting 0.
2.
Automatic mode is deactivated.
Setting the hood lighting
You can switch the hood light on and off via the hob's
control panel.
Touch the
=
symbol in the settings area.

Hood control settings

H o o d c o n t r o l s e t t i n g s
You can adapt the hood controls on the hob to suit your
needs at any time.
Note:
The settings will only be displayed if the appliance is
connected to an extractor hood.
Setting
Fan control (automatic start)
Fan run-on
Automatic light activation
Automatic light deactivation
Disconnect
* Default setting when delivered
Description and options
If you wish, you can set the fan to start up after the hob is switched on, and you can configure the set-
tings depending on how you want the fan to run.
Off – The hood will need to be switched on manually if needed.
Switch on in automatic mode* – In automatic mode, the hood switches on when you switch on
any of the cooking zones.
Switch on in standard mode – The hood is switched on at a fixed setting when you switch on any
of the cooking zones.
The fan run-on eliminates residual odours; the fan automatically switches off once this is complete.
Fan off.
Switch on in automatic mode.*
Switch on with standard fan run-on.
The fan settings cannot be adjusted when the hob is switched off.
If you wish, you can set the hood light to automatically come on when the hob is switched on.
Off
On* – The light switches on when you switch on the hob.
If you wish, you can set the hood light to automatically go out when the hob is switched off.
Off*
On – The light switches off when you switch off the hob.
You can reset the connections you have saved for your home network and extractor hood at any time.
Hood connection
en
49

Advertisement

Table of Contents
loading

Table of Contents