zKeep warm function
T his function is suitable for melting chocolate or butter
K e e p w a r m f u n c t i o n
and for keeping food warm.
Activation
Select a hotplate.
1.
Select the first setting in the settings area. The
2.
indicator will be lit.
This function has now been activated.
Deactivating
Select the hotplate.
1.
Set the heat setting to 0 in the settings area.
2.
The
è
indicator and the cooking zone will switch
themselves off.
This function has now been deactivated.
sTransferring settings
Y ou can use this function to transfer the heat setting
T r a n s f e r r i n g s e t t i n g s
and the programmed cooking time from one hotplate to
another.
To transfer the settings, move the cookware from the
cooking zone that is switched on to another cooking
zone.
è
Note:
You can find additional information on the
positioning of the cookware in the section on ~ "Flex
Zone"
Activation
Move the cookware from the active cooking zone to
1.
a different one.
The cookware is detected. After a short delay, the
display will give you the option to adopt the present
settings for the new cooking zone.
Confirm settings.
2.
The settings are transferred to the new cooking zone.
The initial cooking zone is deactivated.
Notes
When you next place the cookware in this position,
■
the same settings will be used.
Move the cookware only to a cooking zone that is
■
not switched on, that you have not yet preset or on
which no other cookware has been placed
previously.
The PowerBoost or ShortBoost function can only be
■
moved from left to right or right to left if no cooking
zone is active.
If you move more than one item of cookware, the
■
function will only be ready to use for the item of
cookware that was last moved.
Keep warm function
en
21