Led Indication; Map Navigation And Management - EUFY T2193 Owner's Manual

E. Mopping Module
F. Suction Inlet
Suction inlet
G. Charging Base
Status light
Charging contact
pins
12
Washable mopping cloth
Cloth attachment area
Suction inlet
Wire slot exit
Slot winding
Power socket
Power cord storage
compartment

LED Indication

You can see the status of RoboVac from the LED indicators.
and Status
Pulsing blue Charging
Solid blue Standby / Cleaning / Fully charged
Solid red Low power and returning to Charging Base
• RoboVac is off.
• To conserve power, the light automatically turns off
Off
when RoboVac is not docked to the Charging Base
and has been inactive for 10 minutes.
Flashing blue Waiting for Wi-Fi connection
RoboVac has an error.
Flashing red with voice alert
Refer to the "Troubleshooting > Voice Alert" section in
this manual for solutions.

Map Navigation and Management

Navigation
Once RoboVac starts to auto clean, it will move away from the Charging Base and
automatically scan your house to generate maps, intelligently determine its cleaning route,
and divide the space into rooms. The cleaning paths are planned along the walls, following
a Z-shaped cleaning method to complete the cleaning of each zone, one by one.
13