Subscribe to Our Youtube Channel
Related Manuals for EUFY X8 Pro
Summary of Contents for EUFY X8 Pro
- Page 1 X8 Pro Robotic Vacuum Cleaner (T2266) Robotic Vacuum Cleaner with Self-Empty Station (T2276) Owner's Manual T2266/T2276 5100500xxxx V01...
-
Page 2: About Your Robovac
Preparation Documents Replace the Dust Bag (T2276 Only) Charge Your RoboVac Power On / O Troubleshooting Use Your RoboVac with the eufy Clean App Specifi cations Select a Cleaning Mode Customer Service Select a Suction Power Level RoboVac Charging Base（T2266 only）... -
Page 3: Robovac Anatomy
RoboVac Anatomy C. Bottom Dust box Rolling brush A. Front Top cover Swivel wheel Wi-Fi indicator Auto cleaning Start Charging contact pins (×2) Brush guard Filter assembly / Pause button Side brush Spot cleaning button Reset Recharge button Anti-drop sensors (×4) Laser distance •... -
Page 4: Using Your Robovac
It is strongly recommended to place physical barriers or set • Check if the dust box Solid white Working normally a “No-Go” zone via the eufy Clean app in front of fireplaces is full. Solid red and certain areas (i.e. air vents) that may cause damage to Pulsing white •... -
Page 5: Charge Your Robovac
Method 2: Press on the main unit or tap the icon in the eufy Clean app to send RoboVac to the Self-Empty Station / Charging • RoboVac will return to the Self-Empty Station / Charging Base. Base at the end of a cleaning cycle or when its battery is running low. -
Page 6: Power On/Off
You will hear a voice prompt when the Wi-Fi connection has been edges first and following a Z-shaped cleaning path. When cleaning is Tap the “+” icon to add RoboVac to your eufy Clean account. finished, RoboVac automatically returns to the Self-Empty Station / reset, and the Wi-Fi status light will slowly flash blue. - Page 7 In the eufy Clean app, select a suction power level according to your module and stick it firmly. needs: Quiet, Standard (Default), Turbo, and Max.
-
Page 8: Cleaning And Maintenance
With the eufy Clean app, you can set up a "No-Go Zone", "No-Mop Zone", or "Virtual Wall" as a restricted area. This eliminates the need RoboVac Part... -
Page 9: Clean The Swivel Wheel
Clean the Swivel Wheel Open the top cover and remove the dust box. Press down to snap the brush guard into place. Carefully unwind and pull off any hair or substances that are wrapped between the main unit and the side brush. Press the release button to open and empty the dust box with Hair or dust particles can easily get entangled in the swivel wheel. -
Page 10: Troubleshooting
Here are just a few preliminary suggestions. If your problem persists • Clean the sensors carefully with or if you need further troubleshooting information, please visit a dry cloth. https://support.eufylife.com, go to the eufy Clean app, or contact • Restart RoboVac by turning support@eufy.com for help. RoboVac off and on. - Page 11 Integrations” page in the eufy Charging Base. Clean App. RoboVac cannot return to the • Make sure the Self-Empty • Make sure you have a eufy Self-Empty Station / Charging Station / Charging Base is not Clean account and have Base.
-
Page 12: Specifications
Specifications Customer Service Contact Us Input 1.2A 14.4V / 5,200mAh lithium Battery support@eufy.com battery Dust Box Capacity 335ml www.eufy.com Water Tank Capacity 270ml (US/CA) +1 (800) 994 3056 (UK) +44 (0) 1604 936200 (DE) +49 (0) 69 9579 7960 (日本) +81 03 4455 7823...
Need help?
Do you have a question about the X8 Pro and is the answer not in the manual?
Questions and answers